Thermaltake Toughpower PF1 ARGB 1050W 80 Plus Platinum Fully Modular Power Supply

*Image may differ with actual product's layout, color, size & dimension. No claim will be accepted for image mismatch.

Thermaltake Toughpower PF1 ARGB 1050W 80 Plus Platinum Fully Modular Power Supply

Product Id: 55.01.269.95

Regular Price  26,580
Special Price  25,000

Availability?

Quick Overview

Thermaltake Toughpower PF1 ARGB
Series - Toughpower Series
PSU Category - Fully Modular
Maximum Power - 1050 Watt
Input Frequency Range - 50Hz - 60Hz
Brand
Thermaltake
Model
Thermaltake Toughpower PF1 ARGB
Series
Toughpower Series
PSU Category
Full Modular
Maximum Power
1050 Watt
Input Voltage
100V - 240V
Input Frequency Range
50Hz - 60Hz
Input Current
13A
Fan Size
140mm
Lighting Effect
Yes
Lighting Type
ARGB
Zero RPM Fan Mode
Yes
Fan Bearing
Hydraulic Bearing
Efficiency
92% efficiency
80 Plus Rating
80 Plus Platinum
Protection
OCP, OVP, UVP, OPP, SCP, OTP
Over Voltage Protection (OVP)
Yes
Over Power Protection (OPP)
Yes
Over Current Protection (OCP)
Yes
Over Temperature Protection (OTP)
Yes
Short Circuit Protection (SCP)
Yes
Under Voltage Protection (UVP)
Yes
ATX Main Connectors
1
EPS Connectors
2
PCIe Connectors
8
SATA Power Connectors
12
4-Pin Peripheral Connectors
4
Floppy Connectors
1
PFC (Power Factor Correction)
Active PFC
Peak Output Capacity
1260W
Power Good Signal
100-500 msec
Hold Up Time
> 16m sec at 100% of full load
Operating Temperature
0 degree C - + 50 degree C
Operating Humidity
20% - 90% non-condensing
Storage Temperature
-20 degree C - + 70 degree C
Storage Humidity
5% - 95% non-condensing
MTBF
120,000 hours
Form Factor
ATX
Dimensions
150 x 86 x 180mm
Color
Black
Regulatory / Safety Approval
CE, cTUVus, TUV, FCC, BSMI, CCC, EAC, S-Mark
Others
RGB FAN: Yes, PFC (POWER FACTOR CORRECTION): Active PFC, COOLING SYSTEM: 14cm hydraulic bearing fan
Specialty
80 PLUS Platinum certified fully modular analog PSU with 16.8million-color, 18-LED RGB fan, TT Premium Edition, Glow with the Flow, Be Seen from Various Angles, Sync with Motherboard RGB Software, Zero Cable Platform, Ultra Quiet Smart Zero Fan, 30 mV Low Ripple Noise, Fully Modular Low-profile Flat Black Cables, High Amperage Single +12V Rail Design, 80 PLUS Platinum Certified and Intel C6/C7 States Ready
Part No
PS-TPD-1050F3FAPE-1
Warranty
10 year

Details

Brand - Thermaltake, Model - Thermaltake Toughpower PF1 ARGB, Series - Toughpower Series, PSU Category - Fully Modular, Maximum Power - 1050 Watt, Input Voltage - 100V - 240V, Input Frequency Range - 50Hz - 60Hz, Input Current - 13A, Fan Size - 140mm, Lighting Effect - Yes, Lighting Type - ARGB, Zero RPM Fan Mode - Yes, Fan Bearing - Hydraulic Bearing, Efficiency - 92% efficiency, 80 Plus Rating - 80 Plus Platinum, Protection - OCP, OVP, UVP, OPP, SCP, OTP, Over Voltage Protection (OVP) - Yes, Over Power Protection (OPP) - Yes, Over Current Protection (OCP) - Yes, Over Temperature Protection (OTP) - Yes, Short Circuit Protection (SCP) - Yes, Under Voltage Protection (UVP) - Yes, ATX Main Connectors - 1, EPS Connectors - 2, PCIe Connectors - 8, SATA Power Connectors - 12, 4-Pin Peripheral Connectors - 4, Floppy Connectors - 1, PFC (Power Factor Correction) - Active PFC, Peak Output Capacity - 1260W, Power Good Signal - 100-500 msec, Hold Up Time - > 16m sec at 100% of full load, Operating Temperature - 0 degree C - + 50 degree C, Operating Humidity - 20% - 90% non-condensing, Storage Temperature - -20 degree C - + 70 degree C, Storage Humidity - 5% - 95% non-condensing, MTBF - 120,000 hours, Form Factor - ATX, Dimension (W/H/D) - 150 x 86 x 180mm, Color - Black, Regulatory / Safety Approval - CE, cTUVus, TUV, FCC, BSMI, CCC, EAC, S-Mark, Others - RGB FAN: Yes, PFC (POWER FACTOR CORRECTION): Active PFC, COOLING SYSTEM: 14cm hydraulic bearing fan, Specialty - 80 PLUS Platinum certified fully modular analog PSU with 16.8million-color, 18-LED RGB fan, TT Premium Edition, Glow with the Flow, Be Seen from Various Angles, Sync with Motherboard RGB Software, Zero Cable Platform, Ultra Quiet Smart Zero Fan, 30 mV Low Ripple Noise, Fully Modular Low-profile Flat Black Cables, High Amperage Single +12V Rail Design, 80 PLUS Platinum Certified and Intel C6/C7 States Ready, Part No - PS-TPD-1050F3FAPE-1, Warranty - 10 Years

Power Supply Units [PSUs] are often overlooked during a PC build despite its crucial part in determining the reliability of the entire system. All your PC components depend on PSU for power. Even if you’re on a tight budget, you don’t want to make any compromises when it comes to the power supply. We’re here to discuss factors you need to consider before purchasing the PSU for your rig.
 

Factors need to be considered before purchasing a PSU -


Wattage Requirement: There is no point in buying a PSU with way more potential power than you’ll ever use. A PSU calculator web page or software can be handy in finding a rough estimation about the wattage requirement of your build. However, it is not recommended purchasing a PSU just above your system's power needs. A PSU delivers maximum efficiency with 40 to 60 percent load. Besides, the performance of a PSU declines with time. So, you better opt for a PSU capable of taking you through your next few upgrades for multiple years.
 

Physical Dimensions of the PC Case: You must buy a PSU that fits inside your PC case. Higher-wattage PSUs tend to be a bit longer [compared to typical 5.5 inch PSUs] to house the additional power components they need. This may create issues with cable routing or even with placing other internal components inside the case. So, it is a must to go for a PSU compatible with your PC case.
 

Type and Number of Connectors: Different PSUs come with different types of power connectors, including 20/24-pin power, 4-pin ATX12V, 4-pin Molex, floppy, SATA, 6-pin PCI-Express graphics and 8-pin PCI-Express graphics. You must get a power supply with connectors your PC components required. If you don’t find required connectors in a PSU within your budget, check what cable adaptors the PSU includes to extenuate the problem.
 

Modular or Non-Modular: If you have limited space in your case, it’s worth paying extra for a modular power supply. A modular PSU let you plug in the power cables you need and leave the extra ones. This facility will help reducing cable clutter that can hinder airflow and heat up the atmosphere inside the case.
 

Power Efficiency: PSUs convert voltages from wall outlets to lower levels as required by the PC. The power supply wastes some power as heat during the conversion. A PSU with higher efficiency means it can power the PC with minimum loss of electricity. Anything 80% and above is good. With a more efficient PSU, you can end up saving money as it will require less electricity to power your PC. The "80 Plus" Certification shows that the power supply has been tested to have 80% efficiency at every load. There are higher tiers of 80 Plus that show even higher efficiency such as 80+ Bronze or Silver. As the efficiency of the PSU gradually drops during the lifespan of the PSU, it is recommended to opt for a PSU with the maximum efficiency possible as long as it agrees with your budget.

Your review

Your Question