TP-Link CPE220 Outdoor 2.4GHz 300Mbps High Power Wireless Access Point

TP-Link CPE220 Outdoor 2.4GHz 300Mbps High Power Wireless Access Point

Product Id: 29.02.091.25

Regular Price  5,870
Special Price  5,200

Quick Overview

TP-Link CPE220 Outdoor 2.4GHz 300Mbps High Power Wireless Access Point

Additional Information

Model TP-Link CPE220
Data Transfer Rates 300Mbps
Security Protocols WPA/WPA2, WPA-PSK/WPA2-PSK (AES/TKIP) Encryption, 64/128/152-bit WEP Encryption
Network Standards IEEE 802.11b,g,n
Outdoor Range (Meters) 13000m+
Specialty Built-in 12dBi 2x2 dual-polarized directional MIMO antenna, Adjustable transmission power from 0 to 30dBm/1000mw, System-level optimizations for more than 13km long range wireless transmission, TP-LINK Pharos MAXtream TDMA (Time-Division-Multiple-Access) technology improves product performance in throughput, capacity and latency performance, ideal for PTMP applications, Centralized Management System - Pharos Control, AP / Client / Bridge / Repeater / AP Router / AP Client Router (WISP) operation modes, Passive PoE Adapter supports up to 60 meter (200 feet) Power over Ethernet deployment and allows the device to be reset remotely, Built-in High Gain Dual-Polarized Antenna Dedicated metal reflector ensures higher gain and lower noise interference
Others Processor: Qualcomm Atheros 560MHz CPU, MIPS 74Kc, Memory: 64MB DDR2 RAM, 8MB Flash, Dimensions: 276 x 79 x 60mm, Interface: 1 x 10/100Mbps Shielded Ethernet Port (LAN0,Passive PoE in), 1 x 10/100Mbps Shielded Ethernet Port (LAN1, Passive PoE Passthrough), 1 x Grounding Terminal, 1 x Reset Button, Antenna Type: Built-in 12dBi 2x2 Dual-polarized Directional Antenna, Protection: 15KV ESD Protection, 6KV Lightning Protection, Enclosure: Outdoor ASA stabilized plastic material, IPX5 waterproof Certification, Proprietary Protocol: TDMA Mode (with Pharos MAXtream enabled), Frequency: 2.4-2.483GHz, Transmission Power: 30dBm/1000mw (Adjustable power by 1dBm), OS Supported: Windows 7, 8, 10, Vista, XP, 2000, NT, 98SE, MAC OS, NetWare, UNIX or Linux, POE ADAPTER Dimensions: 85.8 x 43.9 x 31.9mm, Input Current: 0.4A Max 100VAC, Input Voltage: 100VA-240VAC 50Hz-60Hz, Button: Remote Reset Button
Warranty 1 year
Made in/ Assemble China
Country Of Origin China

Details


TP-Link CPE220

2.4GHz 300Mbps 12dBi Outdoor CPE CPE220

  • Built-in 12dBi 2x2 dual-polarized directional MIMO antenna
  • Adjustable transmission power from 0 to 30dBm/1000mw
  • System-level optimizations for more than 13km long range wireless transmission
  • TP-LINK Pharos MAXtream TDMA (Time-Division-Multiple-Access) technology improves product performance in throughput, capacity and latency performance, ideal for PTMP applications
  • Centralized Management System – Pharos Control
  • AP / Client / Bridge / Repeater / AP Router / AP Client Router (WISP) operation modes
  • Passive PoE Adapter supports up to 60 meter (200 feet) Power over Ethernet deployment and allows the device to be reset remotely

Point-to-Multi-Point Connections

TP-LINK’s 2.4GHz 300Mbps 12dBi Outdoor CPE, the CPE220 is dedicated to cost effective solutions for outdoor wireless networking applications. With its centralized management application, it is flexible and ideal for point-to-point, point-to-multipoint and outdoor Wi-Fi coverage applications. Professional performance, coupled with user-friendly design, makes CPE220 an ideal choice for both business and home users.

Enterprise Hardware

With Qualcomm Atheros enterprise level chipsets, high gain antennas and high quality material, specially designed enclosure, and PoE power supply, CPE220 is specially designed for outdoor use and can operate flawlessly in almost any climate, with operating temperatures ranging from -40℃ (-40℉) to +70 ℃ (158℉).

Advanced Antenna System

Built-in High Gain Dual-Polarized Antenna
Dedicated metal reflector ensures higher gain
and lower noise interference

13km+ Wireless Data Transmission

Specially designed for outdoor uses, ideal for long distance wireless data transmission over 13km+, tested in the field.

TP-LINK MAXtream TDMA Technology

As network scale increases, wireless competition and collisions among CPEs and base stations will be
so enormous that the real throughput of the network will drop, resulting in a serious impact on end-user
experience. To mitigate these effects, the CPE220 uses MAXtream TDMA Technology.

Pharos Control – Centralized Management System

CPE220 also comes equipped with centralized management software that helps users easily manage all the devices in their network from a single PC - Pharos Control. Functions like device discovery, status monitoring, firmware upgrading, and network maintenance can be managed using Pharos Control.

PharOS

User-friendly web-based management system allows professionals to do more specific configurations.

2.4GHz 300Mbps 12dBi Outdoor CPE CPE220

  • Built-in 12dBi Dual-polarized Directional Antenna
  • AP / Client / Repeater / AP Router /AP Client Router (WISP) operation modes
  • 6KV Lightning Protection
  • Weather Proof Enclosure15KV ESD
  • ProtectionPassive PoE Adapter

 

HARDWARE FEATURES

Processor Qualcomm Atheros 560MHz CPU, MIPS 24Kc
Memory 64MB DDR2 RAM, 8MB Flash

Interface

  • 1 10/100Mbps Shielded Ethernet Port (LAN0,Passive PoE in)
  • 1 10/100Mbps Shielded Ethernet Port (LAN1)
  • 1 Grounding Terminal
  • 1 Reset Button

Power Supply Passive Power over Ethernet via LAN0 (+4,5pins; -7,8pins)
Voltage range: 16-27VDC
Power Consumption 10.8 Watts Max
Note: When deployed using Passive PoE, the power drawn from the power source will 
be higher by some amount depending on the length of the connecting cable.
Dimensions ( W x D x H ) 11×3.1×2.1 inch (276×79×60 mm)
Antenna Type Built-in 12dBi 2x2 Dual-polarized Directional Antenna
Beam Width: 60° (H-Plane) / 30° (E-Plane)
Note: For more details, please refer to datasheet
Protection 15KV ESD Protection
6KV Lightning Protection
Enclosure Outdoor ASA stabilized plastic material
IPX5 waterproof Certification

WIRELESS FEATURES

Wireless Standards IEEE 802.11b/g/n (with Pharos MAXtream disabled)
Proprietary Protocol TDMA Mode (with Pharos MAXtream enabled)
Wireless Speeds Up to 300Mbps (40MHz,Dynamic)
Up to 144.4Mbps (20MHz,Dynamic)
Up to 72.2Mbps (10MHz,Dynamic)
Up to 36.1Mbps (5MHz,Dynamic)
Frequency 2.4~2.483GHz
Note: Available operating frequency may vary depending on the limitations 
of the countries or regions in which the device is used.
Transmission Power 30dBm/1000mw (Adjustable power by 1dBm)
Note: Maximum transmission power may vary across different channels depending 
on the limitations of the countries or regions in which the device is used.

SOFTWARE FEATURES

Wireless Configurations Pharos MAXtream TDMA Technology
802.11b/g/n Modes
Selectable Channel Width: 5/10/20/40MHz
Automatic Channel Selection
Transmission Power Control
Dynamic Frequency Selection (DFS)
WDS Enable/Disable
Security: WPA/WPA2, WPA-PSK/WPA2-PSK (AES/TKIP) Encryption, 64/128/152-bit WEP Encryption
SSID Broadcast Enable/Disable
Multi-SSID with VLAN Tagging (AP mode only)
Distance/ACK Timeout Setting
Wireless MAC Address Filter
Wireless Advanced:
> Beacon Interval/RTS Threshold/Fragmentation
>Threshold/DTIM Interval/AP Isolation/Short GI/Wi-Fi Multimedia
Management Discovery and Remote Management via Pharos Control application
HTTP/HTTPS Web-based management
System Log
SNMP Agent(v2c)
Ping Watch Dog
Dynamic DDNS
SSH Server
System Tools Wireless Signal Quality Indicators:
Signal Strength/Noise/Transmit CCQ/CPU/Memory
Monitors: Throughput/Stations/Interfaces/ARP/Routes/WAN/DHCP
Spectrum Analyzer
Speed Test
Ping
Traceroute
System-level Optimizations Optimized IGMP Snooping/Proxy for multicast applications
Hardware watch dog

POE ADAPTER FEATURES

Dimensions(W x D x H) 85.8×43.9×31.9 mm
Interfaces 1 AC Jack with Earth Ground
1 10/100/1000Mbps Shielded Ethernet Port (Power + Data)
1 10/100/1000Mbps Shielded Ethernet Port (Data)
Button Remote Reset Button
Power Status LEDs Green

Input 100-240VAC, 50/60Hz
Input Voltage 100VA~240VAC @ 50Hz~60Hz
Input Current 0.4A Max @ 100VAC
Output 24VDC, 0.5A Max
+4, 5pins; -7, 8pins. (Support up to 60m Power over Ethernet)
Output Voltage 24VDC(+4,5pins; -7,8pins)
Efficiency >80%
Certifications CE/FCC/UL/IC/GS/PSB/C-tick/SAA/S-Mark/KC-mark

OTHERS

Certification CE, FCC, RoHS, IPX5
Package Contents Outdoor Wireless CPE
24V 0.5A Passive PoE Adapter
Pole Mounting Straps
AC Power Cord
Installation Guide
System Requirements Microsoft Windows 98SE, NT, 2000, XP, Vista™ or Windows 10, Windows 8, Windows 7, 
MAC OS, NetWare, UNIX or Linux.
Note: We recommend you to use one of following Web browsers for an improved user 
experience: Google Chrome, Safari, and Firefox. IE browsers are not recommended.
Environment Operating Temperature: -40℃~70℃ (-40℉~158℉)
Storage Temperature: -40℃~70℃ (-40℉~158℉)
Operating Humidity: 10%~90% non-condensing
Storage Humidity: 5%~95% non-condensing

 

 

Model - TP-Link CPE220, Network Standards - IEEE 802.11b,g,n, Outdoor Range (Meters) - 13000m+, Data Transfer Rates (Mbps) - 300Mbps, Security Protocols - WPA/WPA2, WPA-PSK/WPA2-PSK (AES/TKIP) Encryption, 64/128/152-bit WEP Encryption, Warranty - 1 year, Others - Processor: Qualcomm Atheros 560MHz CPU, MIPS 74Kc, Memory: 64MB DDR2 RAM, 8MB Flash, Dimensions: 276 x 79 x 60mm, Interface: 1 x 10/100Mbps Shielded Ethernet Port (LAN0,Passive PoE in), 1 x 10/100Mbps Shielded Ethernet Port (LAN1, Passive PoE Passthrough), 1 x Grounding Terminal, 1 x Reset Button, Antenna Type: Built-in 12dBi 2x2 Dual-polarized Directional Antenna, Protection: 15KV ESD Protection, 6KV Lightning Protection, Enclosure: Outdoor ASA stabilized plastic material, IPX5 waterproof Certification, Proprietary Protocol: TDMA Mode (with Pharos MAXtream enabled), Frequency: 2.4-2.483GHz, Transmission Power: 30dBm/1000mw (Adjustable power by 1dBm), OS Supported: Windows 7, 8, 10, Vista, XP, 2000, NT, 98SE, MAC OS, NetWare, UNIX or Linux, POE ADAPTER Dimensions: 85.8 x 43.9 x 31.9mm, Input Current: 0.4A Max 100VAC, Input Voltage: 100VA-240VAC 50Hz-60Hz, Button: Remote Reset Button, Specialty - Built-in 12dBi 2x2 dual-polarized directional MIMO antenna, Adjustable transmission power from 0 to 30dBm/1000mw, System-level optimizations for more than 13km long range wireless transmission, TP-LINK Pharos MAXtream TDMA (Time-Division-Multiple-Access) technology improves product performance in throughput, capacity and latency performance, ideal for PTMP applications, Centralized Management System - Pharos Control, AP / Client / Bridge / Repeater / AP Router / AP Client Router (WISP) operation modes, Passive PoE Adapter supports up to 60 meter (200 feet) Power over Ethernet deployment and allows the device to be reset remotely, Built-in High Gain Dual-Polarized Antenna Dedicated metal reflector ensures higher gain and lower noise interference, Country of Origin - China, Made in/ Assemble - China

Product's review