*Image may differ with actual product's layout, color, size & dimension. No claim will be accepted for image mismatch.
￭ High efficiency with 80 PLUS certification
￭ 24/7 continuous power output with 40℃ operating temperature
￭ Class-leading single +12V rail
￭ Active PFC Circuitry
￭ PCI-E 8pin and PCI-E 6pin connector support
￭ Silent running 120mm fan with 18dBA
|Designed for 80 PLUS level of efficiency to reduce wasted heat and save on electricity.||Built-in 120mm fan has excellent airflow and low noise, perfect for quiet home or office use.|
|Powerful single +12V rail design, perfect for future high-end component upgrades or overclocking.||Compact 140mm depth design for easier installation in small from factor.|
Silent running 120mm fan with 18dBA
1 x 24 / 20-Pin motherboard connector
1 x 8 / 4-Pin EPS / ATX 12V connector
4 x 8 / 6-Pin PCIE connector
4 x SATA connector
3 x 4-Pin Peripheral connector
1 x 4-Pin Floppy connector
Model - SilverStone ST70F-ES230, Type - ATX 12V, PSU Category - Non Modular, Maximum Power - 700W, Input Voltage - 180V - 264V, Input Frequency Range - 47Hz - 63Hz, Input Current - 5A, Over Voltage Protection - Yes, Efficiency - 80 Plus Certified, Fan Size - 120mm, ATX Main Connectors - 1, EPS Connectors - 1, PCIe Connectors - 4, SATA Power Connectors - 4, 4-Pin Peripheral Connectors - 3, Floppy Connectors - 1, MTBF - 100,000 hours, Dimension( W/H/D) - 150 x 86 x 140mm, Warranty - 3 Year, Others - Noise Level: 18 dBA minimum, Cooling System: Single 120mm silent fan, Operating temperature: 0 degree C - 40 degree C, Active PFC (PF>0.9 at full load), Power density: 388W per liter, Protection: Over power protection, Over voltage protection, Short circuit protection, High efficiency with 80 PLUS certification, 24/7 continuous power output with 40 degree C operating temperature, Class-leading single +12V rail, Active PFC Circuitry, PCI-E 8pin and PCI-E 6pin connector support, Silent running 120mm fan with 18dBA, Weight: 1.43 kg, Part No - SST-ST70F-ES230
Power Supply Units [PSUs] are often overlooked during a PC build despite its crucial part in determining the reliability of the entire system. All your PC components depend on PSU for power. Even if you’re on a tight budget, you don’t want to make any compromises when it comes to the power supply. We’re here to discuss factors you need to consider before purchasing the PSU for your rig.
Factors need to be considered before purchasing a PSU -
There is no point in buying a PSU with way more potential power than you’ll ever use. A PSU calculator web page or software can be handy in finding a rough estimation about the wattage requirement of your build. However, it is not recommended purchasing a PSU just above your system's power needs. A PSU delivers maximum efficiency with 40 to 60 percent load. Besides, the performance of a PSU declines with time. So, you better opt for a PSU capable of taking you through your next few upgrades for multiple years.
You must buy a PSU that fits inside your PC case. Higher-wattage PSUs tend to be a bit longer [compared to typical 5.5 inch PSUs] to house the additional power components they need. This may create issues with cable routing or even with placing other internal components inside the case. So, it is a must to go for a PSU compatible with your PC case.
Different PSUs come with different types of power connectors, including 20/24-pin power, 4-pin ATX12V, 4-pin Molex, floppy, SATA, 6-pin PCI-Express graphics and 8-pin PCI-Express graphics. You must get a power supply with connectors your PC components required. If you don’t find required connectors in a PSU within your budget, check what cable adaptors the PSU includes to extenuate the problem.
If you have limited space in your case, it’s worth paying extra for a modular power supply. A modular PSU let you plug in the power cables you need and leave the extra ones. This facility will help reducing cable clutter that can hinder airflow and heat up the atmosphere inside the case.