*Image may differ with actual product's layout, color, size & dimension. No claim will be accepted for image mismatch.
All-in-one 360mm liquid cooler with PWM fans that supports 5V RGB capable motherboards.
Thermaltake Water 3.0 360 ARGB Sync Edition comes with three 120 mm fan with a large surface radiator, high performance waterblock and pump for ultimate CPU cooling. The built-in Pure ARGB fan features compression blades, hydraulic bearing, and 16.8 million colors LEDs that is ready to sync with 5V RGB capable motherboards from Asus, Gigabyte, MSI and AsRock. Users can easily switch RGB lighting effects using the ARGB controller that is included in the packet, or by ASUS Aura Sync, GIGABYTE RGB Fusion, MSI Mystic Light Sync and AsRock Polychrome software. Water 3.0 ARGB Sync Edition Series allows users to enjoy better cooling performance and greater CPU protection!
Tt LCS Certified is a Thermaltake exclusive certification applied to only products that pass the design and hardcore enthusiasts standards that a true LCS chassis should be held to. The Tt LCS certification was created so that we at Thermaltake can designate to all power users which chassis have been tested to be best compatible with extreme liquid cooling configurations to ensure you get the best performance from the best features and fitment.
Water 3.0 ARGB Sync Edition is equipped with Thermaltake Pure 12 ARGB Sync Radiator Fan. It features compression blades, hydraulic bearing, and a 16.8 million colors LED ring with 9 addressable LEDs that is ready to sync with 5V RGB capable motherboards from Asus, Gigabyte, MSI and AsRock.
The ARGB controller allows users to switch LED modes, LED colors, and LED Speeds when using a motherboard without a 5V addressable RGB header. Users can switch between flow, ripple, pulse, blink, wave, full light, RGB spectrum, and off modes with various colors and LED speeds options.
*The maximum signal output for one controller is 90 addressable LEDs.
Specially designed for Water 3.0 ARGB Series, the large surface radiator increases the cooling surface and exceptional heat dissipation.
The high performance copper base plate accelerates the heat conductivity. The pre-refilled coolant reduces any stress from liquid replenishment hassle. Additionally, the reinforced sleeved cable delivers the best durability and prevents the tubing from any damages.
The high quality and reliable pump enables the maximum amount of water circulation, keeping the copper plate continuously cool. The low evaporation tube effectively decreases the loss of coolant; therefore, no refill is required.
Featuring the latest cooling performance, the self-contained design of the Thermaltake Water 3.0 ARGB Sync Edition Series provides an easy installation system and a totally maintenance-free operation, requiring only the minimum amount of space in the chassis.
Model - Thermaltake Water 3.0 360 ARGB Sync Edition, Cooler Type - Liquid CPU Cooler, Dimension (Heat Sink/Radiator) - 394 x 120 x 27mm (Radiator), Fan Air Flow - 56.45 CFM, Fan Dimensions - 120 x 120 x 25mm, Fan Air Pressure - 1.59 mm-H2O, Fan Speed - PWM 500-1500 R.P.M (2510-4PIN), Fan Noise Level - 25.8 dB-A, LED Color - ARGB, Supported Socket - Intel LGA 2066/20113/2011/1366/1156/1155/1151/1150, AMD TR4/AM4/FM2/FM1/AM3+/AM3/AM2+/AM2, Fan Rated Voltage - 12 V & 5V, Speciality - Water 3.0 360 ARGB Sync Edition CPU Cooler, Pure 12 ARGB Sync Radiator Fan, Sync with Motherboard RGB Software, Switch LED Modes with ARGB Controller, High Efficiency Radiator, High Performance Waterblock, High Quality Pump, ARGB Sync Edition comes with three 120 mm fan with a large surface radiator, high performance waterblock and pump for ultimate CPU cooling, The built-in Pure ARGB fan features compression blades, hydraulic bearing, and 16.8 million colors LEDs that is ready to sync with 5V RGB capable motherboards from Asus, Gigabyte, MSI and AsRock, Others - Water Block Material: Copper, Pump Motor Speed: 3600 RPM, Pump Rated Voltage: 12 V & 5V, Pump Power Input: 12V - 3.9 W, 5V - 1.06 W, Fan Power Input: 12V - 1.44 W, 5V - 1.6W (one fan), Fan Rated Voltage: 12 V & 5V, LED Control: ARGB controller or 5V addressable RGB header on motherboard, Tube Length: 400 mm, Tube Material: Rubber, Weight: 2250gm, Part No - CL-W234-PL12SW-A, Warranty - 1 year